You are here

Instructables

Subscribe to Instructables feed
Updated: 1 hour 57 min ago

Building Solid, Variable & Removable Wall Bars

Tue, 11/05/2019 - 09:26
Instead of pressuring (destroying) the door frame by an expanding pull-up bar or attaching all of the weight to the frame itself I build pillars out of small wooden boards. They are laying on the trim/baseboard and that way most of the load is transferred to the ground. Start by drilling out hole...
By: mercurska

Continue Reading »
Categories: Design

3D-Printed Loom Knit Scarf

Tue, 11/05/2019 - 09:10
I was trying to think of an idea for the multi-discipline challenge but was coming up short for a long time. I knew I wanted to combine fiber arts with 3D printing. Finally, I came up with the idea to 3D print a small knitting loom to knit an infinity scarf.This knitting loom is pretty nifty because...
By: ellygibson

Continue Reading »
Categories: Design

Miss Haversham - the Perpetual Bride From Charles Dickens's Great Expectations

Tue, 11/05/2019 - 08:20
I'm not a huge fan of Charles Dickens but I do find some of his characters, Miss Haversham, being one, incredibly well-crafted and interestingly in her case, more like the vibrant, three dimensional woman portrayed in the Gothic novels of the period.I have a close interest in Miss Haversham be...
By: Pavlovafowl

Continue Reading »
Categories: Design

Leg Warmers

Tue, 11/05/2019 - 07:33
I love leg warmer season and better yet upcyclying old clothes! You want to cut the sleeves in front of the seam. You can also remove the thread using a seam ripper which is what I did. Keep the remaining pieces for later projects if you'd like, I always do. Lay there sleeves on a flat surfa...
By: msjbud

Continue Reading »
Categories: Design

Lock, Shock, & Barrel Night Lites

Tue, 11/05/2019 - 05:28
Hi All, this Instructable is over a year in the making. I started this last Halloween and well found out how dangerous power tools can be. I'll share with you all the gory details in next step. The end result was me rethinking my initial idea, which ended up being more for speed than safety. The foc...
By: GFire

Continue Reading »
Categories: Design

Simplified 3D Printed Animatronic Dual Eye Mechanism

Tue, 11/05/2019 - 05:27
Having built a simple single-eye mechanism in the past, I wanted to improve on the design as well as making it more accessible to the maker community. The updated assembly uses parts that can easily be bought online, and almost all the components can be printed easily without supports. Designing the...
By: Ikkalebob

Continue Reading »
Categories: Design

Uploading Vibrational Sensor Value to IOT ThingSpeak Using NodeMCU

Tue, 11/05/2019 - 02:14
There are several critical machines or expensive equipments which suffer damages due to vibrations. In such a case, a vibration sensor is required to find out whether the machine or equipment is producing vibrations or not. Identifying the object which is continuously vibrating is not a tricky job i...
By: Soorajece

Continue Reading »
Categories: Design

Making a Pen Turning Mandrel Kit From Scrap

Mon, 11/04/2019 - 22:50
This tutorial is not about pen turning but how to make your own mandrel kit.These images show the final assembly and together with a pen turning keit (Streamline Pen). There are many kinds and styles of kits available on eBay and elsewhere.I could have bought a basic kit including a collet with a m...
By: GarthKH

Continue Reading »
Categories: Design

Sauron's Mace From Lord of the Rings

Mon, 11/04/2019 - 21:58
You can craft an intricately detailed mace used by Sauron in the Lord of the Rings to enhance many different costumes. This mace is simple to construct, inexpensive to build, and impressively detailed. Using the link below, print the template for the mace blades.http://www.stormthecastle.com/how-...
By: Aragorn9

Continue Reading »
Categories: Design

Sauron's Mace From Lord of the Rings

Mon, 11/04/2019 - 21:49
You can craft an intricately detailed mace to enhance many different costumes. This mace is simple to construct, inexpensive to build, and impressively detailed Using Photo 1, create a template for the mace blades and triangles.Trace blades and triangles of template onto 12mm EVA foam. Cut out 6 p...
By: RaisingBlessings

Continue Reading »
Categories: Design

Spooky Stuffed Peppers

Mon, 11/04/2019 - 21:47
Need a quick Halloween themed dinner idea? We have the best tasting solution. These stuffed peppers don't take much effort or ingredients and are very forgiving to make. Even better, if people want to fill their own peppers, they have the option to include or exclude whatever ingredients they want! ...
By: Onyx Ibex

Continue Reading »
Categories: Design

Cardboard Thanos Sword

Mon, 11/04/2019 - 21:16
I've finally decided to try my hand at making an instructable! Thanos's sword from Avengers: Endgame. It took me a while, but the end product is amazing! It's fun to make and it makes a pretty good prop. It's a little flimsy, but unless you're actually fighting someone with it, it should be fine. An...
By: Cool_Cody.

Continue Reading »
Categories: Design

The Very Hungry Caterpillar Baby Costume

Mon, 11/04/2019 - 20:49
Here is a simple sewing project for your baby to become The Very Hungry Caterpillar by Eric Carle. It's a costume, but it's also a swaddle! So you don't need a special occasion for your baby to wear it. Though my older daughter is having her school Book Fair soon and baby sister might just drop b...
By: paperplateandplane

Continue Reading »
Categories: Design

The Ix (The Last Dragon Chronicles) / Budget Creepy Costume

Mon, 11/04/2019 - 20:33
*Pictures will be updated to a higher quality. Currently away from home, but that won't stop me from giving you folks a quality-ish product!!The Ix. Perhaps you've never heard this name before. For good reason, because once you hear this dreaded beasts name, it'll all be over. You'll cease to exist....
By: graciepickle

Continue Reading »
Categories: Design

Hobbit Riding an Ent Illusion Costume

Mon, 11/04/2019 - 20:18
I had a great idea one day.I have seen illusion costumes before, but I wanted to make it my own.Enter the Hobbit-Riding-an-Ent Costume!Be aware that this costume is a bit clunky to carry around and that you will have to bend to get in doorways, but I think it's worth it!Did it pretty cheaply, too! ...
By: JustineM32

Continue Reading »
Categories: Design

DIY "Absolem" Caterpillar Costume | Alice in Wonderland Fancy Dress

Mon, 11/04/2019 - 20:12
I've always found the caterpillar in Alice & Wonderland intriguing (...and maybe a little scary...), and I thought the concept would make a great costume. I particularly like the idea of making a cosy and comfy costume (!) so that is what I aimed for with this.I hope you enjoy this Instructable :) ...
By: FernMakes

Continue Reading »
Categories: Design

Hedwig Costume From Harry Potter

Mon, 11/04/2019 - 20:03
Excited to post my first ever instructable! Hope you enjoy my take on Hedwig. Let me know if you have any questions. I would be more than happy to help. Supplies Needed for Hedwig from Harry Potter Costume (not all supplies are in image please read below):1 White sweater. (I purchased mine for $8...
By: BlueFreckles

Continue Reading »
Categories: Design

Rainbow Japanese Steamed Cake and Candy Melts Decorations

Mon, 11/04/2019 - 19:46
This is an amazing and so easy cakeno oven, ready in less one hour so let's start the recipe ;) first prepare your ingredients3 eggs 100g caster sugar 1/2 tsp baking powder 1 tsp vanilla extract 1/4 tsp salt 140g all purpose flour 100 ml milk vegetable colors, mold size 15 cm x 9 cm first in one b...
By: alessandraanguiano

Continue Reading »
Categories: Design

Rock Candy!

Mon, 11/04/2019 - 18:04
Rock Candy is a fun treat that just about everyone makes as kids. It's easy, requires very few ingredients and the results look like real crystals (or at least they do when you're five)! So join me as we make these yummy rock candy crystals! Have fun! Pour water into pan, bringing it to a high hea...
By: Anna-Grace

Continue Reading »
Categories: Design

How to Make a Puzzle Rack

Mon, 11/04/2019 - 17:11
I made this puzzle rack to fit all of the Melissa and Doug Puzzles in my house. This was a specific size because I needed it to fit into an IKEA Kallax shelf. This was a fun one to figure out and it really challenged me with some of the joints. I have detailed plans available for purchase if you are...
By: Madebymitch

Continue Reading »
Categories: Design
©2019 Richard Esmonde. All rights reserved.